Description
|
Bare PCB
|
Loaded PCB
|
| DT102 RS-485/232
Mini-Terminal on a 2.5 Inch SimmStick platform |
 |
 |
| DT201 One inch prototype
board |
 |
|
| DT202 Two inch prototyping
board. |
 |
|
| DT203 24 LED's and 4 / 8
Switches on a SimmStick board. 2" module. Uses 1 to 3 ULN2803's, 4 momentary
switches, 8 link selected switches. |
 |
 |
DT204 Two inch expansion
board.
- Can be used just to add 4 slots to a bus. The bus continues through.
- Used as a right angle or left angle bus connection, so that you can have a SimmStick
facing up or down, or both.
- Signal Isolation and cross connection using either links or DIP switches.
- Convert Simm connector to 30 pin Female.
|
 |
|
DT205 Relay board for 4
relays. Carries a partial bus on to the next module so that a total of 16 relays could be
used by cascading four boards. Uses SimmStick bus signals D0 to D15. Can select a group of
4 bits by placement of a single ULN2803 (or 2003) in one of four positions. 4 monitor
LEDs. Screw terminals for outputs. Suits many Relay types.
|
 |
 |
